Tag: Tungsten alloys

The Difference between Tungsten Silver Alloy and Tungsten Copper Alloy

0 Comment

The Difference between Tungsten Silver Alloy and Tungsten Copper Alloy Tungsten silver alloy and tungsten copper alloy are both tungsten-based alloys, both of which can be used in aerospace, aviation, electronics, military, defense, and other fields. However, due to their different doping elements, there is a big difference in performance between the two. So in this […]

Tags: , , , , , , , ,

Tungsten Alloy for Forklift Counterweight

0 Comment

Tungsten Alloy for Forklift Counterweight The reason why tungsten alloy is used as the main raw material for the forklift counterweight is that it has a higher proportion than other counterweights. To put it more simply, when the volume is the same, the weight of tungsten alloy is much higher than the weight of other […]

Tags: , , , , , , ,

Tungsten Alloys for Mobile Phone Motors

0 Comment

Tungsten Alloys for Mobile Phone Motors Tungsten alloy is a kind of alloy based on tungsten (85% ~ 99% tungsten content) and added with a small amount of Ni. Cu, Fe. Co. Mo, Cr, and other elements. Its density is as high as 16.5 ~ 18.75g/ cm³. Thanks to their excellent properties, tungsten alloys are widely […]

Tags: , , , , , , ,

Uses of Tungsten Alloy Wafers

0 Comment

Uses of Tungsten Alloy Wafers Tungsten alloy is an alloy composed of tungsten and other elements. A tungsten alloy wafer is a wafer made of tungsten-molybdenum alloy or tungsten thorium alloy or rare earth tungsten alloy or tungsten rhenium alloy. It is often used as a substrate in power semiconductor devices and electric vacuum devices. It […]

Tags: , , , , , , , , , ,

Tungsten Copper Alloys for Motors

0 Comment

Tungsten Copper Alloys for Motors As one of the key parts of the DC motor, the commutator segment can be made not only of silver-copper alloy, but also of tungsten copper alloy. This is mainly due to the combination of the advantages of copper and tungsten in tungsten-copper alloys. That is, it has the characteristics of high strength, […]

Tags: , , , , , , , , ,

Uses of Tungsten Nickel Iron Alloys

0 Comment

Uses of Tungsten Nickel Iron Alloys As a typical representative of high-density tungsten-based alloys, tungsten-nickel-iron alloys are widely used due to their higher density, smaller volume expansion coefficient, excellent plasticity, and weldability. Then in which areas can the alloy be used? In this article, let’s take a closer look at the uses of tungsten nickel iron […]

Tags: , , , , , , ,

Tungsten Copper Alloy vs Tungsten Nickel Iron Alloy

0 Comment

Tungsten Copper Alloy vs Tungsten Nickel Iron Alloy Tungsten-copper alloy, like tungsten-nickel-iron alloy, is a high-density tungsten alloy. But tungsten copper alloy vs tungsten nickel iron alloy, what’s the difference between them? If you looking for the answer to this question, then you’ve come to the right place. In this article, we will take a […]

Tags: , , , , , , , , ,

How to Improve the Performance of Tungsten Copper Alloy?

0 Comment

How to Improve the Performance of Tungsten Copper Alloy? Tungsten-copper alloy is an alloy composed of tungsten and copper. Commonly used tungsten copper alloys contain 10% to 50% copper. The alloy can be prepared by powder metallurgy and has good electrical and thermal conductivity, good high-temperature strength, and certain plasticity. In this article, we will introduce how to improve […]

Tags: , , , , , , , , ,

Magnetic Saturation and Coercivity of WC-Co Hard Alloys

0 Comment

Magnetic Saturation and Coercivity of WC-Co Hard Alloys WC-Co hard alloy is an alloy with tungsten and cobalt as the main components. According to the cobalt content, WC-Co hard alloy can be divided into three types: high cobalt (20%~30%), medium cobalt (10%~15%), and low cobalt (3%~8%). This alloy can be used as a tool to process cast […]

Tags: , , , , , , , , , , ,

Tungsten Alloys for Gamma-Ray Shielding Material

0 Comment

Tungsten Alloys for Gamma-Ray Shielding Material In addition to tungsten-nickel-iron alloy (W-Ni-Fe alloy), γ-ray shielding material can also be produced with tungsten copper alloy (W-Cu alloy). W-Ni-Fe alloy and W-Cu alloy are both high-density tungsten alloys, both of which use the W phase as the hard phase, but due to the difference in bonding phase metals, their production processes and […]

Tags: , , , , , , , , , , ,