Tungsten Copper Alloys for Motors As one of the key parts of the DC motor, the commutator segment can be made not only of silver-copper alloy but also of tungsten copper alloy. This is mainly due to the combination of the advantages of copper and tungsten in tungsten-copper alloys. That is, it has the characteristics of high strength, […]
Tags: Advanced Refractory Metals, ARM, Copper, permanent magnets, refractory alloys, Refractory Metals, Tungsten, Tungsten alloys, Tungsten Copper Alloys, Types of Refractory Metals
Uses of Tungsten Nickel Iron Alloys As a typical representative of high-density tungsten-based alloys, tungsten-nickel-iron alloys are widely used due to their higher density, smaller volume expansion coefficient, excellent plasticity, and weldability. Then in which areas can the alloy be used? In this article, let’s take a closer look at the uses of tungsten nickel-iron alloys. […]
Tags: Advanced Refractory Metals, ARM, refractory alloys, Refractory Metals, Tungsten, Tungsten alloys, Tungsten Nickel Iron Alloys, tungsten-nickel-iron
Tungsten Copper Alloy vs Tungsten Nickel Iron Alloy Tungsten-copper alloy, like tungsten-nickel-iron alloy, is a high-density tungsten alloy. But tungsten copper alloy vs tungsten nickel iron alloy, what’s the difference between them? If you looking for the answer to this question, then you’ve come to the right place. In this article, we will take a […]
Tags: Advanced Refractory Metals, ARM, powder metallurgy, refractory alloys, Refractory Metals, Tungsten alloys, Tungsten Copper, Tungsten Copper Alloy, Tungsten Nickel Iron Alloy, W-Cu alloy
Tungsten Copper Alloy for Electronic Packaging Materials Tungsten copper alloy (W-Cu alloy) is an alloy that combines the advantages of tungsten and copper. Specifically, it not only has the characteristics of high melting point, high density, and low expansion coefficient of metal tungsten but also good electrical and thermal conductivity properties of metal copper, so […]
Tags: Advanced Refractory Metals, ARM, Electronic Packaging Materials, refractory alloys, Refractory Metals, supplier of refractory alloys, supplier of refractory metals, Tungsten Copper Alloys, Tungsten Powder, W-Cu alloys
How to Improve the Performance of Tungsten Copper Alloy? Tungsten-copper alloy is an alloy composed of tungsten and copper. Commonly used tungsten copper alloys contain 10% to 50% copper. The alloy can be prepared by powder metallurgy and has good electrical and thermal conductivity, good high-temperature strength, and certain plasticity. In this article, we will introduce how to improve […]
Tags: Advanced Refractory Metals, ARM, Copper, Performance of Tungsten Copper Alloy, powder metallurgy, refractory alloys, Refractory Metals, Tungsten, Tungsten alloys, Tungsten Copper Alloys
Cemented Carbide for Watch Chains For the new generation of watch chains, the reason why cemented carbide should be used as the core raw material is that it has better wear resistance and the product is not prone to deformation under any circumstances. In this article, let’s take a quick look at the cemented carbide […]
Tags: Advanced Refractory Metals, ARM, Cemented Carbide, cobalt powder, manufacturer of refractory metals & alloys, refractory alloys, Refractory Metals, supplier of refractory metals & alloys, tungsten carbide, tungsten product
Common Uses of Molybdenum Plates As a trace element necessary for the human body, animals, and plants, molybdenum is a silver-white metal, hard and tough. In fact, various tissues of the human body contain molybdenum, the total amount in the human body is 9mg, and the liver and kidney happen to be the parts with the highest […]
Tags: Advanced Refractory Metals, ARM, Molybdenum Electrodes, Molybdenum Plates, refractory alloys, Refractory Metals, supplier of refractory alloys, supplier of refractory metals
Tungsten Alloys for Gamma-Ray Shielding Material In addition to tungsten-nickel-iron alloy (W-Ni-Fe alloy), γ-ray shielding material can also be produced with tungsten copper alloy (W-Cu alloy). W-Ni-Fe alloy and W-Cu alloy are both high-density tungsten alloys, both of which use the W phase as the hard phase, but due to the difference in bonding phase metals, their production processes and […]
Tags: Advanced Refractory Metals, ARM, Nickel powder, refractory alloys, Refractory Metals, Tungsten alloys, Tungsten Copper Alloy, Tungsten Nickel Iron Alloy, Tungsten Powder, Types of Tungsten Alloys, W-Cu alloy, W-Ni-Fe Alloy
How to Prolong the Service Life of Molybdenum Wire? Molybdenum wire is made of precious metals such as molybdenum. Pure molybdenum wire is used for winding-core wires, brackets, lead wires, heating elements, molybdenum foil tapes, and spraying of auto parts. Lanthanum molybdenum wire can be used for wire-wound core glass seals, molybdenum foil tapes, furnace heating […]
Tags: Advanced Refractory Metals, ARM, How to Prolong the Service Life of Molybdenum Wire, lanthanum molybdenum wire, Molybdenum, molybdenum wire, molybdenum wire for cutting, pure molybdenum wire, refractory alloys, Refractory Metals, yttrium-molybdenum wire
Production Methods of Spherical Tungsten Powder Spherical tungsten powder has the characteristics of good powder fluidity and high tap density and is often used as a high-tech material in thermal spraying, porous materials, filter materials, rocket sweating materials, powder metallurgy industry, and other fields. In this article, let’s take a look at the production methods […]
Tags: Advanced Refractory Metals, ARM, manufacturer & supplier of refractory metals & alloys, Production Methods of Spherical Tungsten Powder, refractory alloys, Refractory Metals, tungsten oxide, Tungsten Powder, Tungsten Wires, WO3
Copyright © 1994-2024 Advanced Refractory Metals owned by Oceania International LLC, All Rights Reserved.