|Shape||Bar, tube, wire or customized|
|Electrical Resistance (µOhm-cm)||7.77×10-6Ω|
|Yield Strength||128 Mpa|
Zirconium-clad copper is the main component of a metal anode coated with a zirconium layer of a certain thickness on a copper component. It combines the excellent electrical conductivity of copper with the excellent corrosion resistance of zirconium.
It can not only ensure the original conductivity of copper but also protect the copper body from corrosion by using titanium cover and effectively reduce the pollution of electroplating and plating solution.
|Zr clad Cu platesT||Two-layers||Zr + Ni Zr + Al||1-20/2-120|
|Zr + Ni Zr + Cu|
|Three-layers||Zr + stainless steel, etc.||0.1-10/1-100/0.1-10|
|Zr clad Cu bars||Zr+Cu||Tambour round|
|Zr clad Cu tubes||Customized|
Square (mm): side length (10 – 40) 5
Round (mm): φ (2-80) × (0.5 – 3.0)
Flat (mm): long (10 – 100) × wide (10 – 30)
Drum shape (mm): φ (25, 27, 29, 32, 34) × 14 × (1.0 – 2.0)
Rounded corner transition (mm): R (3 – 5)
– Dimensionally stable in chlor-alkaline-electrolysis
– Galvanizing lines for steel strips
– Tinning lines for steel strips
– For chromium-plating
– Protecting cathodes from corrosion
Zirconium Clad Copper Parts are clearly tagged and labeled externally to ensure efficient identification and quality control. Great care is taken to avoid any damage which might be caused during storage or transportation.
Copyright © 1994-2023 Advanced Refractory Metals owned by Oceania International LLC, All Rights Reserved.