Titanium wire has excellent corrosion resistance, low density, and high specific strength. In the corrosion environment, its surface will form an oxidation film layer to protect wire mesh from being corroded, and especially in sea water, wet chlorine, chlorite, organic salts, it shows a better corrosion resistance.
Advanced Refractory Metals supplies high-quality titanium wires, including straight wire, coiled wire, and titanium welding wire.
|Specifications||ASTM B863 ASME SB863|
|Titanium Wire Dimensions||ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360|
|Titanium Wire Length||100 mm TO 6000 mm, customizable|
|Titanium Wire Diameter||10 mm To 100 mm or as per client requirement|
|Titanium Wire Main Types||
|Titanium Wire Density||8.89 g/cm3|
|Ultimate Strength (≥ MPa):||580-750|
|Titanium WireResistance (μΩ.m):||as standard|
|Titanium WireElongation (≥ %):||28-30|
|Surface||Polished bright, Smooth|
|Titanium Wire Technique||Cold Rolled, hot rolled|
|Titanium Wire Condition||M, Y, 1/2Hard|
|Tempers||Tempers range from dead soft annealed to ultra spring temper|
|Titanium welded wire mesh||Roll Width: 24inch, 36inch, 1Metre, 48inch, 72inch, or 84inch
Roll Length: 100feet or 150feet
|Titanium wire mesh weaving methods||plain weave, twill weave, dutch weave|
|Offered in a wide range of packages including:||
* Welding Wires
* MMO Wire Anodes
* Glass Frames, etc.
Our titanium wires are wrapped in foam and packaged in plywood cases to ensure safe storage and transportation.
Copyright © 1994-2019 Stanford Advanced Materials, All Rights Reserved.