Aluminum Alloys 5052 and 6061 offer a wide range of design opportunities to benefit consumer electronics manufacturers. These light weight materials enable manufacturers to trim precious ounces, coupled with high strength to make smaller, thinner components feasible. While they score high marks for function, these alloys also take on an outstanding variety of end products.
Advanced Refractory Metals is a leading supplier of Aluminum Alloy 6061 Foil. We offer competitive pricing and great lead times on all our materials, and we’re capable of supplying custom materials per any specs/drawings you provide us with.
|
Finish: |
Standard Finishes |
|
Temper: |
Standard Tempers |
|
Thickness: |
0.0005 to 0.064 in |
|
Width: |
0.375 to 60 in |
Chemical Properties
|
Aluminum (Al): |
Remainder |
|
Chromium (Cr): |
0.04 to 0.35% |
|
Copper (Cu): |
0.7% |
|
Iron (Fe): |
0.7% |
|
Magnesium (Mg): |
0.8 to 1.2% |
|
Manganese (Mn): |
0.15% |
|
Other Total: |
0.15% |
|
Silicon (Si): |
0.40 to 0.8% |
|
Titanium (Ti): |
0.15% |
|
Zinc (Zn): |
0.25% |
Mechanical Properties
|
Elongation (Annealed): 1 |
25 |
|
Elongation (H14): |
22 |
|
Elongation (H16): |
12 |
|
Tensile Strength (Annealed): 2 |
13 x 1000 psi |
|
Tensile Strength (H14): |
35 x 1000 psi |
|
Tensile Strength (H16): |
45 x 1000 psi |
|
Yield Strength (Annealed): 3 |
8 x 1000 psi |
|
Yield Strength (H14): |
21 x 1000 psi |
|
Yield Strength (H16): |
40 x 1000 psi |
Our Aluminum Alloy Foil is carefully handled to minimize damage during storage and transportation and to preserve the quality of our product in its original condition.
Copyright © 1994-2024 Advanced Refractory Metals owned by Oceania International LLC, All Rights Reserved.
