High content aluminum alloys, sometimes referred to as EC (electrically conduction) at times, both contain a minimum of 99.5% and are more electrically conductive than other 1000 series aluminum. These are preferred alloys in the transformer and switch gear markets, as they offer the most economical conductive alloy in the 1000 series. Although other aluminum items have higher aluminum content, most find those alloys as difficult to source and are exponentially more expensive than the 1350 and 1050 alloys.
Advanced Refractory Metals is a leading supplier of Aluminum Alloy 1350 Foil. We offer competitive pricing and great lead times on all our materials, and we’re capable of supplying custom materials per any specs/drawings you provide us with.
|
Finish: |
Standard Finishes |
|
Temper: |
Standard Tempers |
|
Thickness: |
0.0005 to 0.064 in |
|
Width: |
0.375 to 60 in |
Chemical Properties
|
Aluminum (Al): |
99.50% |
|
Chromium (Cr): |
0.01% |
|
Copper (Cu): |
0.05% |
|
Iron (Fe): |
0.40% |
|
Magnesium (Mg): |
– |
|
Manganese (Mn): |
0.01% |
|
Other Total: |
0.10% |
|
Silicon (Si): |
0.10% |
|
Titanium (Ti): |
– |
|
Zinc (Zn): |
0.05% |
Mechanical Properties
|
Elongation (Annealed): 1 |
23% @ 10 in |
|
Elongation (H19): |
1.5% @ 10 in |
|
Tensile Strength (Annealed): 2 |
12 x 1000 psi |
|
Tensile Strength (H12): |
14 x 1000 psi |
|
Tensile Strength (H14): |
16 x 1000 psi |
|
Tensile Strength (H16): |
18 x 1000 psi |
|
Tensile Strength (H19): |
27 x 1000 psi |
|
Yield Strength (Annealed): 3 |
4 x 1000 psi |
|
Yield Strength (H12): |
12 x 1000 psi |
|
Yield Strength (H14): |
14 x 1000 psi |
|
Yield Strength (H16): |
16 x 1000 psi |
|
Yield Strength (H19): |
24 x 1000 psi |
Our Aluminum Alloy Foil is carefully handled to minimize damage during storage and transportation and to preserve the quality of our product in its original condition.
Copyright © 1994-2024 Advanced Refractory Metals owned by Oceania International LLC, All Rights Reserved.
